Samsung DMR57LFS Installation Guide (ENGLISH) - Page 16
< gt, prevent backflow see the figure below.
UPC - 036725405103
View all Samsung DMR57LFS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
installing the dishwasher 3. Check the size of the sink's drain hose connector. If needed, cut the drain hose so its end fits into the sink connector (1/2 in., 3/4 in. or 1 in. - as shown in the Figure below). If the end of the drain hose does not fit into the drain hose connector of the sink, use an adaptor purchasable at a plumbing/hardware supply store. 4. When connecting the drain hose, make sure to fasten it using a hose clamp. Failing to do so may cause water leakage. 5. If there is no air gap, make sure to hang the middle of the drain hose in a high location to prevent backflow (see the figure below). Be careful when cutting off the end of the drain hose as there is a risk of injury. Clean CAUTION around the sink's drain connection so that it does not damage the hose. Check for any foreign items in the drain hose and remove them. 1 in. ¾ in. ½ in. (25 mm) (19 mm) (13 mm) If required, cut off the end of the drain hose at one of the dotted lines. Sink Drain hose Min. 30 in. (762 mm) Min. 20 in. (508 mm) Dishwasher 16_ installing the dishwasher