Samsung DMR57LFS Installation Guide (ENGLISH) - Page 17
Wiring Connections, Step 10 - no power
UPC - 036725405103
View all Samsung DMR57LFS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
02 Installing the dishwasher STEP 10 Wiring connections 1. Before connecting the power cable to the dishwasher, make sure to turn off the circuit breaker. 2. Check to remove the junction box cover located at the bottom right at the front of the dishwasher. You will find three power wires from the dishwasher including the grounding line. 3. Connect the power cable to the dishwasher. Twist and connect each wire using wire connectors. When using wire connectors, insert each wire as shown in Figure 14 and rotate the wire connector. 4. Recheck whether the power cable is connected correctly. (Each colored wire should be connected to its opposite wire of the same color. White should be connected to white, black to black, and green to green.) 5. Replace the junction box cover on the dishwasher. Power cable Junction box Black to black White to white Green to green (Ground to ground) Strain relief installing the dishwasher _17