Samsung DVE41A3000W User Manual - Page 27
STEP 4, Level the dryer
View all Samsung DVE41A3000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation • A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8" (1 cm) deep well socket. • Since january 1, 1996, The national electric code requires that new wiring (not existing) utilize a 4-wire connection to this dryer. STEP 4 Level the dryer To ensure optimal performance, the dryer must be level. 1. Gently slide the dryer into the desired location. A 2. Use a level (A) and check the levelness of the dryer from side to side and front to back. 3. If the dryer is not level, turn the leveling feet (B) left or right to adjust the height. 4. Once the dryer is level, make sure the dryer stands firmly on the floor. 5. Plug in the dryer. B A B NOTE • To set the dryer to the same height as your washer, turn the leveling feet to the right until it fully retracts (A). Then, turn the leveling feet to the left to extend (B) until the dryer and the washer are the same height. • Extend the leveling feet only as much as necessary. Extending the leveling feet more than necessary can cause the dryer to vibrate. DV3000A(SEM)_DC68-03784P-00_EN.indd 27 English 27 2020-12-07 4:50:56