Samsung DVE41A3000W User Manual - Page 30
Installation check codes, Clg Cg, Ducting, requirements, C80 C8, C90 C9
View all Samsung DVE41A3000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation Installation Installation check codes : LED ON, : LED Blink Check code Ins 0 C80 C90 Ct tC C1 dC 9C1 Display Drying Cooling Wrinkle Prevent End Extra Low Temp. Time (min.) Low Medium High 20 40 60 80 Check code 0 Clg (Cg) C80 (C8) C90 (C9) Ct tC C1 Meaning Vent condition is good. The vent is clogged. About 80 % of the vent is clogged. (This may decrease the drying performance.) Over 90 % of the vent is clogged. (This may lead to poor drying performance or cause malfunction) The internal temperature of the dryer is too low (below 32 °F (0 °C)) or too high (over 104 °F (40 °C)) and therefore, vent blockage cannot be detected. Temperature sensor error. The unit is detecting items inside the drum, or there is an error on the dry sensor. Solution 1. Clean the lint filter. 2. Check your vent condition. (Refer to the "Ducting requirements" section) * You must take measures (such as cleaning) through expert personnel. Leave the dryer at room temperature (41~95 °F (5~35 °C)) for an hour and check again. Contact a service center. Remove items from the drum and check again. If the problem continues, contact a service center. 30 English DV3000A(SEM)_DC68-03784P-00_EN.indd 30 2020-12-07 4:50:56