Samsung DVE55M9600V/A3 User Manual - Page 58
after Wrinkle Prevent, Wrinkle Away
View all Samsung DVE55M9600V/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Troubleshooting Symptom Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release). Water drips from the nozzle when the Steam cycles starts. Sprayed water is not visible during Steam cycles. Extended time. Action • Small loads of 1 to 4 items work best. • Load fewer items. Load similar-type items. • Take out the items immediately after drying is complete. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. • Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Troubleshooting 58 English FlexDry_DM9600M_DC68-03381H-07_EN.indd 58 2019-06-03 2:57:23