Samsung DW80R7060UG User Manual - Page 10
Depending on where your electrical outlet is, you may need to cut a hole in the opposite
View all Samsung DW80R7060UG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation If this is a new installation, follow these steps: 1. Using a 21/2 inch hole saw, cut a hole into the side of the cabinet that holds the sink as shown in Figure 1-1 below. 2. If the base inside the sink cabinet is raised above the kitchen floor and is higher than the connections on the dishwasher, make a hole in the base inside the cabinet and in the cabinet side as shown in Figure 1-2. NOTE Depending on where your electrical outlet is, you may need to cut a hole in the opposite cabinet side. Figure 1-1 Figure 1-2 Installation The hole for the water supply line, drain hose and power cables. CAUTION Make sure the edges of the cabinet hole are smooth before you insert the drain hose through the hole. Sharp edges from the cabinet hole may cause damage to the drain hose, resulting in a leak from the hose. 10 English DW8000R_DD68-00210A-00_EN.indd 10 4/25/2019 11:10:35 AM