Samsung DW80R7060UG User Manual - Page 24

STEP 9, Securing the dishwasher

Get Samsung DW80R7060UG PDF manuals and user guides View all Samsung DW80R7060UG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Installation STEP 9 Securing the dishwasher You must secure the dishwasher to the countertop or cabinet side walls for additional stability and safety. To the countertop If the countertop is made of wood or the material will not be damaged by drilling, follow this. 1. Put a large towel into the bottom of the dishwasher(covering the filter) to prevent wood shavings or a dropped screw from falling into the sump. 2. Insert the provided brackets into the top front holes of the dishwasher as shown. If the brackets are too long, cut them down using pliers. 3. Pre-drill the overlapping holes of the brackets. Make sure the hole is smaller than the diameter of the screw. 4. Tighten the provided screws. 5. Assemble the provided plastic caps as shown. CAUTION • After installing the dishwasher inside the cabinet, check if the door opens and closes freely with no interruption with the cabinet. • If the plastic caps are not assembled, water may leak and cause a fire or electric shock. Installation 24 English DW8000R_DD68-00210A-00_EN.indd 24 4/25/2019 11:10:55 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Installation
Installation
English
24
STEP 9
Securing the dishwasher
You must secure the dishwasher to the countertop or cabinet side walls for additional
stability and safety.
To the countertop
If the countertop is made of wood or the material will not be damaged by drilling, follow
this.
1.
Put a large towel into the bottom of
the dishwasher(covering the filter) to
prevent wood shavings or a dropped
screw from falling into the sump.
2.
Insert the provided brackets into the
top front holes of the dishwasher as
shown.
If the brackets are too long, cut them
down using pliers.
3.
Pre-drill the overlapping holes of the
brackets.
Make sure the hole is smaller than the
diameter of the screw.
4.
Tighten the provided screws.
5.
Assemble the provided plastic caps as
shown.
CAUTION
•
After installing the dishwasher inside
the cabinet, check if the door opens and
closes freely with no interruption with
the cabinet.
•
If the plastic caps are not assembled,
water may leak and cause a fire or
electric shock.
DW8000R_DD68-00210A-00_EN.indd
24
4/25/2019
11:10:55 AM