Samsung FE710DRS/XAA User Manual (user Manual) (ver.1.0) (English) - Page 19
Location of the radiant surface elements and controls, Hot surface indicator, Cooking areas
View all Samsung FE710DRS/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Location of the radiant surface elements and controls The radiant control knobs operate the radiant surface elements on the cooktop as shown below. 02 SURFACE COOKING 1 5 2 3 4 6 1. Single element: Left rear 2. Single element: Right rear 3. Dual element: Left front (3,000W) 4. Triple element: Right front (3,000W) 5. Warming center: Center rear 6. Hot surface indicator Hot surface indicator • Comes on when the unit is turned on or hot to the touch. • Stays on even after the unit is turned off. • Glows until the unit is cooled to approximately 150 °F. Cooking areas • The cooking areas on your range are identified by permanent circles on the glass cooking surface. For the most efficient cooking, fit the pan size to the element size. • Pans should not extend more than ½˝ to 1˝ beyond the cooking area. • When a control is turned on, you can see a glow through the glass cooking surface. The element will cycle on and off to maintain the preset heat setting, even at high settings. • For more information on selecting proper types of cookware, refer to the section "Using the proper cookware" on page 23. FE710DRS_XAA_DG68-00333A-01.indd 19 Surface cooking _19 2011-03-16 �� 2:46:37