Samsung FE710DRS/XAA User Manual (user Manual) (ver.1.0) (English) - Page 58
Steam-cleaning
View all Samsung FE710DRS/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Steam-cleaning How to set the oven for steam-cleaning Steam-cleaning saves time and energy when the oven needs light cleaning. For heavier-duty cleaning of debris and grease, use the self-cleaning function. 1. Remove all accessories from the oven. 2. Pour approximately 10 oz. (300 ml) of water onto the bottom of the empty oven and close the oven door. Use normal water only, not distilled water. 3. Press the STEAM CLEAN pad. 4. Press the START/SET pad. The motor-driven door lock will engage automatically. When the operation is complete, the display will blink and a beep will sound. 5. Press the CLEAR/OFF pad. 6. Clean the oven's interior. There will be a significant amount of water remaining on the bottom of the oven after a steam-cleaning cycle. Remove the residual water with a sponge or soft dry cloth. The steam-clean feature will not operate when the partition is in the oven. When steam-cleaning, use exactly 10 oz. of water since this produces the best results. If you press the STEAM CLEAN pad when the oven temperature is above 100 °F, Hot will appear in the display. Because these functions produce the best results when started while the oven is cool, we recommend that you wait until the oven has cooled down and Hot disappears from the display. After a steam-cleaning cycle • Take care when opening the door before a steam-cleaning procedure has ended. The water on the bottom is hot. • Open the oven door and remove the remaining water with a sponge. Do not leave the residual water in the oven for any length of time. Wipe the oven clean and dry with a soft cloth. Do not forget to wipe under the oven door seal. • Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven interior. Remove stubborn residue with a nylon scourer. You can remove lime deposits with a cloth soaked in vinegar. • If the oven remains dirty, you can repeat the procedure once the oven has cooled. • For heavy residue, such as grease left over from roasting, we recommend that you rub detergent into the residue before activating the steam-cleaning function. • After cleaning, leave the oven door ajar at a 15 ° angle to allow the interior enamel surface to dry thoroughly. 58_ Maintaining your appliance FE710DRS_XAA_DG68-00333A-01.indd 58 2011-03-16 �� 2:46:55