Samsung FE710DRS/XAA User Manual (user Manual) (ver.1.0) (English) - Page 57

How to set the oven for self-cleaning, How to delay the start of self-cleaning, How to turn off

Get Samsung FE710DRS/XAA PDF manuals and user guides View all Samsung FE710DRS/XAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

05 MAINTAINING YOUR APPLIANCE How to set the oven for self-cleaning 1. Select the length of time for the self-cleaning operation, eg. 3 hours. Press the SELF CLEAN pad once for a 3 hour clean time, twice for a 4 hour clean time, or 3 times for a 2 hour clean time. The default setting is 3 hours. 2. Start the self-cleaning cycle. Press the START/SET pad. The motor-driven door lock will engage automatically. When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times. • You will not be able to start a self-cleaning cycle if the control lockout feature is activated or if the oven's temperature is too hot. • The oven door locks automatically. The display will show the clean time remaining. You cannot open the oven door until the temperature drops to a safe/cool temperature and the door unlocks automatically. • The self-cleaning feature will not operate when the warming center or warming drawer is on. • The self-clean feature will not operate when the partition is in the oven. • The self-clean feature will not operate when a surface cooktop element is on. if a surface element gets turned on during a self-cleaning cycle, the cycle will turn off automatically. How to delay the start of self-cleaning 1. Press the SELF CLEAN pad. Select the desired self-clean time by pressing the SELF CLEAN pad. 2. Press the DELAY START pad. 3. Using the CLOCK and number pads, enter the time you want the clean cycle to start. 4. Press the START/SET pad. The display will show Delay, Self clean and Lock icon. The motor-driven door lock will engage automatically. 5. Self-Cleaning cycle will turn on automatically at the set time. 6. When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times. How to turn off the self-cleaning feature You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven. 1. Press the CLEAR/OFF pad. 2. You will be able to open the oven door once the oven has cooled down for approximately 1 hour. After a self-cleaning cycle • You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture. • If the oven is not clean after one cycle, repeat the cycle. • You cannot set the oven for cooking until the oven is cool enough for the door to unlock. Maintaining your appliance _57 FE710DRS_XAA_DG68-00333A-01.indd 57 2011-03-16 �� 2:46:55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Maintaining your appliance _
57
05 MAINTAINING YOUR APPLIANCE
How to set the oven for self-cleaning
1
.
Select the length of time for the self-cleaning operation, eg. 3
hours.
Press the
SELF CLEAN
pad once for a 3 hour clean time, twice
for a 4 hour clean time, or 3 times for a 2 hour clean time.
The default setting is 3 hours.
2
. Start the self-cleaning cycle.
Press the
START/SET
pad. The motor-driven door lock will
engage automatically.
When the self-cleaning cycle is done, End will show in the display
and a beep will sound 6 times.
• You will not be able to start a self-cleaning cycle if the control lockout feature is activated
or if the oven’s temperature is too hot.
• The oven door locks automatically. The display will show the clean time remaining. You
cannot open the oven door until the temperature drops to a safe/cool temperature and
the door unlocks automatically.
• The self-cleaning feature will not operate when the warming center or warming drawer is
on.
• The self-clean feature will not operate when the partition is in the oven.
• The self-clean feature will not operate when a surface cooktop element is on. if a surface
element gets turned on during a self-cleaning cycle, the cycle will turn off automatically.
How to delay the start of self-cleaning
1
. Press the
SELF CLEAN
pad.
Select the desired self-clean time by pressing the
SELF CLEAN
pad.
2
. Press the
DELAY START
pad.
3
. Using the
CLOCK
and number pads, enter the time you want the clean cycle to start.
4
. Press the
START/SET
pad.
The display will show
Delay, Self clean
and Lock icon. The motor-driven door lock will
engage automatically.
5
.
Self-Cleaning cycle will turn on automatically at the set time.
6.
When the self-cleaning cycle is done, End will show in the display and a beep will sound 6
times.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.
1
. Press the
CLEAR/OFF
pad.
2
.
You will be able to open the oven door once the oven has cooled down for approximately 1
hour.
After a self-cleaning cycle
• You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.
• If the oven is not clean after one cycle, repeat the cycle.
• You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
FE710DRS_XAA_DG68-00333A-01.indd
57
2011-03-16
�� 2:46:55