Samsung HC-R4245W Quick Guide (easy Manual) (ver.1.0) (English) - Page 16

4 Press the ... or † button to select the antenna connection, then press the ENTER button. • Air : "Air" antenna signal Cable : "Cable" antenna signal Air+Cable : "Air" and "Cable" antenna signals T V Auto Program Select the antennas to memorize. Air Cable Air + Cable Start Start Start When selecting Cable TV system: Press the ... or † button to select "Cable", then press the ENTER button. Press the ... or † button to select "STD", "HRC" or "IRC", then press the ENTER button. • STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory". T V Auto Program Select the antennas to memorize. Air Cable Air + Cable Start Start Start T V Auto Program Select the cable system. STD HRC IRC Storing Channels in Memory 5 Press the ... or † button to select the antennas to memorize. Press the ENTER button to select "Start". T V Auto Program Select the antennas to memorize. Air Cable Air + Cable Start Start Start 6 Press the ENTER button to start the auto program. The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. • The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. Auto Program Auto Program in Progress. Air Channel 15 Stop • All available DTV and analog channels are automatically stored in memory when channels are selected by the direct tuning function. English-16