Samsung HC-R4755W User Manual (user Manual) (ver.1.0) (English) - Page 18
Connecting a VCR, TV Rear Panel
View all Samsung HC-R4755W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 14~17). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Connect a coaxial cable between the "ANT 1 IN (Air)" (or "ANT 2 IN (Cable)") terminal on the TV and the antenna out terminal on the VCR. A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 2 Connect a set of audio cables between the "AV IN 1 (L, R)" (or "AV IN 2 (L, R)") jacks on the TV and AUDIO OUT jacks on the VCR. If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable. 3 Connect a video cable between the "AV IN 1 (VIDEO)" (or "AV IN 2 (VIDEO)") jack on the TV and the VIDEO OUT jack on the VCR. TV Rear Panel From Cable Coaxial Cable Audio Cable 2 1 Video Cable 3 Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. From Antenna VCR Rear Panel • Also, you can connect to "AV 3" on the side panel of TV. English - 18