Samsung HW-Q950A/ZA User Manual - Page 16

Auto EQ, If you are using the function for the first time

Get Samsung HW-Q950A/ZA PDF manuals and user guides View all Samsung HW-Q950A/ZA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Auto EQ Samsung's Auto EQ Technology uses a microphone mounted in the subwoofer to detect and correct low-frequency response peaks caused by the room dimensions and the subwoofer location. The result will be a more neutral overall low-frequency response. • Subwoofer should be placed with a minimum of 3" (8 cm) clearance from each side to the nearest boundary. • You must keep the room as quiet as possible while operating the Auto EQ tuning. • Do not use any buttons until the Auto EQ tuning is complete. • Auto EQ tuning takes about 2 minutes. • During Auto EQ tuning, there is no sound from the Soundbar's main unit and rear speakers. If you are using the function for the first time 1. Press the (Sound Control) button until Auto EQ is selected. 2. Press the Up/Down buttons to select Tuning, and then press the button. 3. Tuning will start, and the progress appears in percentage. ‒ To cancel tuning, press the Up, Down, Left, Right or button, and then press the ‒ If the tuning is failed, LED blinks in red. ‒ If the tuning is successful, LED blinks in blue. button to confirm. If you have done the tuning process 1. Press the (Sound Control) button until Auto EQ is selected. 2. Press the Up/Down buttons to select Tuning, and then press the button. 3. Press the Up/Down buttons to select one of the following options. ‒ On: Turn on the previously tuned EQ settings. ‒ Off: Turn on the default EQ settings. ‒ Tuning: Start the tuning process again. ENG - 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
ENG -
16
Auto EQ
Samsung’s
Auto EQ
Technology uses a microphone mounted in the subwoofer to detect and correct low-frequency response peaks caused by the
room dimensions and the subwoofer location. The result will be a more neutral overall low-frequency response.
•
Subwoofer should be placed with a
minimum of 3” (8 cm) clearance
from each side to the nearest boundary.
•
You must keep the room as quiet as possible while operating the
Auto EQ
tuning.
•
Do not use any buttons until the
Auto EQ
tuning is complete.
•
Auto EQ
tuning takes about 2 minutes.
•
During
Auto EQ
tuning, there is no sound from the Soundbar’s main unit and rear speakers.
If you are using the function for the first time
1.
Press the
(Sound Control)
button until
Auto EQ
is selected.
2.
Press the
Up
/
Down
buttons to select
Tuning
, and then press the
button.
3.
Tuning will start, and the progress appears in percentage.
‒
To cancel tuning, press the
Up
,
Down
,
Left
,
Right
or
button, and then press the
button to confirm.
‒
If the tuning is failed, LED blinks in red.
‒
If the tuning is successful, LED blinks in blue.
If you have done the tuning process
1.
Press the
(Sound Control)
button until
Auto EQ
is selected.
2.
Press the
Up
/
Down
buttons to select
Tuning
, and then press the
button.
3.
Press the
Up
/
Down
buttons to select one of the following options.
‒
On
: Turn on the previously tuned EQ settings.
‒
Off
: Turn on the default EQ settings.
‒
Tuning
: Start the tuning process again.