Samsung LN-T466F Quick Guide (easy Manual) (ver.1.0) (English) - Page 84
Problem, Possible Solution, On your computer check: Power, Signal Cable.
View all Samsung LN-T466F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Problem Horizontal bars appear to flicker, jitter or shimmer on the image. Possible Solution Adjust the Coarse tuning and then adjust the Fine tuning. Vertical bars appear to flicker, jitter or shimmer on the image. Screen is black and power indicator light blinks steadily. Image is not stable and may appear to vibrate when you have a computer connected to the PC input. Adjust the Coarse tuning and then adjust the Fine tuning. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard. If the setting is not correct, use your computer utility program to change the display settings. Your TV supports multiscan display functions within the following frequency domain: Horizontal frequency (kHz) 30~60 Vertical frequency (Hz) 60~75 PC Maximum refresh rate (at 60 Hz) 1920 X 1080 Image is not centered on the screen. Adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e. STB) with a digital signal. The damaged picture appears in the If Just Scan is selected in some external devices, the damaged picture may appear in the corner of the screen. corner of the screen. This symptom is caused by external devices, not TV. The TFT LCD panel uses a panel consisting of sub pixels (6,220,800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. English - 82