Samsung MM-ZB7 Instruction Manual - Page 10

Viewing the Various Functions on Your System GB You can view the various functions available on your system. 1 Press the Demo button. Result: The various functions available are listed in turn on the display. All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections. 2 To cancel this function, press Demo again. TUNER Band CD TAPE AUX Down Tuning Mode Volume Rec/Pause REV.Mode Open/Close Up DemDo/eDmisoplay Sound Mode MIC Setting the Clock Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock: When you first purchase the micro component system After a power failure After unplugging the unit For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 Switch the system on by pressing Standby/On ( ) . 2 Press Timer/Clock twice. Result: CLOCK is displayed. 3 Press Program/Set. Result: The hour flashes. 4 To... Increase the hours Decrease the hours Press... 5 When the correct hour is displayed, press Program/Set. Result: The minutes flash. 6 To... Increase the minutes Decrease the minutes Press... 7 When the correct time is displayed, press Program/Set. Result: The clock starts and is displayed, even when the system is in standby mode. You can display the time, even when you are using another function, by pressing Timer/Clock once. Timer Timer/ On/Off Clock 1 2 EQ/P.Sound Sleep Aux TAPE REV. RDS CD SYNC. Mode Display PTY CD 3,5R,7epeat +10 Program/ VOL. Band Set Tune/CD Mode 4,6 4,6 VOL. 10