Samsung MM-ZB7 Instruction Manual - Page 14

Searching for and Storing the Radio Stations GB You can store up to: 15 FM stations 8 MW stations 7 LW stations 1 Switch the system on by pressing Standy/On ( ) . 2 Select the required frequency band by pressing TUNER (Band) again on the front panel or Band on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) LW Medium Wave Long Wave 3 To search for a station... Press Tuning Mode or Tune/CD Mode Manually One or more times until MANUAL is displayed. Automatically One or more times until AUTO is displayed. PRESET function is explained in detail in the section "Selecting a Stored Station" on. 4 Select the station to be stored by: or Pressing or buttons to increase or decrease the frequency respectively. To scroll through the frequencies faster when searching manually, hold down the or buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. 5 If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: a Press Program/Set. Result: The PROGRAM is displayed for a few seconds. b Press or to assign a program number between 1 and 15. c Press Program/Set to store the radio station. Result: PROGRAM is no longer displayed and the station is stored. 6 To store any other radio frequencies required, repeat Steps 3 to 5. The PROGRAM function can be used to assign a new station to an existing program number. Standby/On TUNER 2 CD 4 5 Down Tuning Mode 3 O Up 1 TAPE 4 5 Volume 5 Program/ Set 4 5 VOL. 3 Tune/CD MMooddee 2 Band 45 VOL. Selecting a Stored Station You can listen to a stored radio station as follows: 1 Switch the system on by pressing Standby/On ( ) . 2 Select the required frequency band by pressing TUNER(Band) on the front panel. 3 Select the radio station as follows. To listen to ... Press ... Stored station 1. the Tuning Mode or Tune/CD Mode button until "PRESET" is displayed. 2. or button to select the required program. Standby/On 1 TUNER 2 CD TAPE Phones AUX Down 3 Rec/Pause Tuning Mode Volume REV.Mode O Up Sound Mode Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press Mono/ST. to switch from stereo mode to mono. The quality of the sound will be improved. Repeat Program/ Set VOL. Band Tune/CD Mode VOL. Mono/ST Mute 14