Samsung MultiXpress SCX-8628 User Manual Ver.1.03 (English) - Page 147
tray MP. Load, Option Feed door
View all Samsung MultiXpress SCX-8628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Message Fusing unit is not compatible. Check user's guide. Fuser unit is not installed correctly. Install it. HDD is almost full-1. Check user's guide. HDD is almost full-2. Check user's guide. HDD is almost full-3. Check user's guide. HDD is almost full-4. Check user's guide. HDD is almost full-5. Check user's guide. HDD is almost full-6. Check user's guide. HDD System Failure [error number]:Turn off then on. Meaning The fuser unit you have installed is not for your machine. The fuser unit is not properly installed. HDD is almost full in the machine. HDD is almost full in the machine. HDD is almost full in the machine. HDD is almost full in the machine. HDD is almost full in the machine. HDD is almost full in the machine. There is a problem in the hard disk. Suggested solutions Install a Samsung-genuine fuser unit, designed for your machine, call for service. Reinstall the fuser unit. If the problem persists, call for service. Check Address Book or User Profile. If necessary, remove the data which is unused in Address Book or User Profile. Check Stored Document, or Secured Job in Job Status. If necessary, remove the data which is unused in Stored Document or Secured Job. Check System Log at Security in SyncThru™ Web Service. If necessary, remove the data in System Log. • Print or remove the jobs on the queue which are waiting for its turn. You can check the jobs pressing Job Status (see "Job Status button" on page 36). • Print or remove the received fax jobs in Secure Receive (see "Receiving in secure receiving mode" on page 70). There is a problem in the machine. Check the error message on the display screen and resolve the problem. There is a problem in the machine. Check the error message on the display screen and resolve the problem. Turn the machine off and back on again. If the problem persists, call for service. Message Meaning Suggested solutions Input System Failure [error number]:Pull [tray number] out and insert it. Image transfer belt cleaning unit is not compatible. Check user's guide. Image transfer belt unit is not original Samsung. Check user's guide. ITB Unit Failure [error number]:Turn off then on. MSOK System Failure [error number]:Turn off then on. Network cable is disconnected. Check it. Option Feed door is opened. Close it. Original paper jam in front of scanner Original paper jam inside of scanner Output tray(face down) is full. Remove printed media Output tray(face up) is full. Remove printed media Paper is empty in [tray number]. Load paper. Paper is empty in tray MP. Load paper. Paper is low in [tray number]. Load paper. There is a problem in the tray. The image transfer belt cleaning unit you have installed is not for your machine. The image transfer belt you have installed is not for your machine. There is a problem in the image transfer belt unit. There is a problem in the engine system. The machine is not connected with a network cable. The door is not securely latched. The originals are jammed in duplex automatic document feeder. The originals are jammed in duplex automatic document feeder. The output tray (face down) is full. The output tray (face up) is full. There is no paper in the tray. There is no paper in the multi-purpose tray. Running out of paper in the tray. Open and close the tray. If the problem persists, call for service. Install a Samsung-genuine image transfer belt cleaning unit, designed for your machine, call for service. Install a Samsung-genuine image transfer belt, designed for your machine, call for service. Turn the machine off and back on again. If the problem persists, call for service. Turn the machine off and back on again. If the problem persists, call for service. Connect the machine to the network with a network cable. Close the door until it locks into place. Clear the jam (see "Original paper jam in front of scanner" on page 133). Clear the jam (see "Original paper jam inside of scanner" on page 134). Remove papers from the output tray (face down), the machine resumes printing. Remove papers from the output tray (face up), the machine resumes printing. Load paper in the tray. Load paper in the multi-purpose tray. Load paper in the tray. Troubleshooting_ 147