Samsung NE59M4310SS/AA Installation Guide - Page 11
installing the range
View all Samsung NE59M4310SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
03 INSTALLING THE RANGE installing the range INSTALLING THE ANTI-TIP DEVICE WARNING WARNING To reduce the risk of tipping, the appliance must be secured by properly installing the Anti-Tip device packed with the appliance. • Refer to the installation instructions supplied with the bracket. • Unless properly installed, the range could be tipped by stepping or sitting on the door. Injury may result from spilled hot liquids or from the range itself. *approximately 21/32"(16.5mm) Screw must enter wood or concrete Anti-Tip bracket *NOTE: To install Anti-Tip bracket, release the leveling leg. A minimum clearance of 21/32"(16.5mm) is required between the range bottom and the kitchen floor. 1. Locate the bracket using the template The Anti-Tip bracket is packaged with a template. The instructions include information necessary to complete the installation. Read and follow the instructions on the sheet (template) for range installation. 2. Level the range Level the range by adjusting the leveling legs with a wrench. Lower range Raise range Leveling leg Install_30_Electric_Range_USA_DG68-00108G-09_EN+MES.indb 11 English - 11 2018-07-31 3:48:05