Samsung NE59M4310SS/AA Installation Guide - Page 7

STEP 3. INSTALLING THE POWER CORD For power cord installations, hook the strain relief over the power cord hole (13/8") located below the rear of the drawer body. Insert the power cord through the strain relief and tighten the device. Conduit connection plate 02 CONNECTING THE POWER Power cord Strain relief • You must install the power cord with a strain relief. • Attach the strain relief to the 13/8" opening in conduit connection plate. Installing a 3-wire power cord WARNING WARNING The neutral or ground wire of the power cord must be connected to the neutral terminal located in the center of the terminal block. The power leads must be connected to the lower left and the lower right terminals of the terminal block. 1. Remove the 3 lower terminal screws from the terminal block. 2. Insert the 3 terminal screws through each power cord terminal ring and into the lower terminals of the terminal block. Be certain that the center wire (white/neutral) is connected to the center lower position of the terminal block. Neutral terminal Black Live 1 3. Tighten screws securely into the terminal block. DO NOT remove the ground strap connection. 4. Go to step 5 on page 10 and proceed with the installation. Black Ground strap White Red White Red Live 2 CAUTION CAUTION You must check voltage after connecting power cord. Live 1 - Neutral Live 2 - Neutral Live 1 - Live 2 120 V 120 V 208 V / 240 V Install_30_Electric_Range_USA_DG68-00108G-09_EN+MES.indb 7 English - 7 2018-07-31 3:48:04