Samsung NQ70T5511DS/AA Installation Guide - Page 13

Barrier A C B A. Trim Left B. Trim Bottom C. Screw 3. Push oven completely into the cabinet and center the oven into the cabinet cutout. 4. Remove the tape from front trims. • Securely fasten the oven to the cabinet using the screws provided. • Insert the screws through hole in trim aligning with hole in lower oven frame. Do not overtighten screws. WARNING When inserting the oven, use caution not to deform or damage the barrier underneath. A C B A. Trim Left B. Trim Bottom Large C. Screw 5. The bottom metal trim are shipped in the foam packing. To install the metal bottom trim, see following instructions. • Align tab of the bottom trim with a hole in the left side trim of the unit as shown. Repeat on the right side. • Using one screw on each side of the trim tab, fasten the trim securely to the oven. CAUTION Lower oven door should be removed, before fastening the trim. Install_NQ5300R_NQ70R5511DG_AA_DG68-01149A-04_EN.indd 13 6. If the cutout size is larger than 1.5 inches use of the wider bottom trim is recommended. NOTE The upper oven can be fixed with 4 screws, and the lower oven with 2 screws. English 13 11/11/2019 6:07:32 PM Installation instructions