Samsung NV40 User Manual Ver.1.0 (English) - Page 41

Self-timer / Remote control ■ Motion Timer Motion Pressing the shutter button after setting the Motion Timer Icon & Self-timer lamp Blink (1 second interval) Detecting the subject's movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds ■ The Motion Timer flows are as followings. (Movie Clip mode excluded) Selecting the Motion Timer  Pressing the Shutter button  Confirming the composition (Within 6 sec.)*1  Starting the detection (Swing your hands fully)*2  Stopping the detection (Do not move)  Taking an image (after 2 sec.) *1 : The camera detects the subject's movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds. *2 : Move your body or hands fully. In the following cases, the Motion Timer may not operate. ● The focus distance is over 3m. ● The exposure is too bright or dark. ● In backlight conditions. ● The movement is insignificant. ● The movement is detected beyond the center part (50%) of the sensor where the movement is recognized. ● If the camera doesn't sense any movement for 30 seconds, or the camera doesn't sense [The detection range of Motion Timer] stillness after sensing movement. >