Samsung NV40 User Manual Ver.1.0 (English) - Page 67

Setup menu ( ) OSD set You can check shooting (Recording mode) and displayed image (Play back mode) information. Full  Basic Function Description Hide OSD set OSD set LCD Bright LCD Save Start Image Exit:BACK [Recording mode menu] Full Basic  Hide OSD set OSD set LCD Bright LCD Save Start Image Exit:BACK [Play back mode menu] LCD brightness You can adjust the LCD brightness. - Sub menus : [Auto], [Dark], [Normal], [Bright] - If the [Auto] menu is selected, the LCD brightness will be set automatically according to the shooting conditions. - If the [Auto] menu is selected in the Playback mode, the LCD brightness is fixed as the [Normal] menu. [Full] : When the smart button is touched, the icons will be enlarged and OSD will be displayed. [Basic] : When the smart button is touched, the icons will be enlarged and OSD will not be enlarged. [Function Description] : Function description is displayed to provide detailed information on a function. [Hide] : If the camera doesn't operate for about 3 seconds, all OSD will disappear. When the shutter is pressed down or half way down, the available number of shots, shutter speed, Aperture value and Auto focus area will be displayed. OSD may be displayed by using the camera buttons except for the shutter button. LCD save If the camera is not used for about 30 seconds, the power and camera status lamps blink and the LCD monitor turns off. (LCD save is only applied to the Recording mode menu.) Auto Dark Normal  Bright OSD set OSD set LCD Bright LCD Save Start Image Exit:BACK Off On  OSD set OSD set LCD Bright LCD Save Start Image Exit:BACK >