Samsung NV51T5511DG/AA Installation Guide - Page 13

Electrical connection, For Double Ovens, WARNING, Electrical Shock Hazard

Get Samsung NV51T5511DG/AA PDF manuals and user guides View all Samsung NV51T5511DG/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Electrical connection For Double Ovens WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Make sure to ground the oven. Failure to follow these instructions can result in death, fire, or electrical shock. This oven is manufactured with a neutral (white) power supply wire and a cabinetconnected ground (green or bare) wire twisted together. A A. UL listed or CSA approved conduit connector 1. Disconnect power. 2. Feed the flexible conduit from the oven through the opening in the cabinet. 3. Remove junction box cover if it is present. 4. Install a UL listed or CSA approved conduit connector to the junction box. 5. Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 7. See "Electrical Connection Options Chart" to complete installation for your type of electrical connection. For Single Ovens WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Connection Options Chart If your home has: 4-wire Go to section: ½" (1.3 cm) 4-Wire Cable from Home Power Supply 3-wire 3-Wire Cable from Home Power Supply ½" (1.3 cm) NOTE If the power connection is plugged in improperly, "bAd LinE" appears on the display. Reconnect the power connection properly, and the message disappears. English 13 Installation instructions Install_NW9000K_DG68-00862A-09_EN.indd 13 2019-11-11 5:36:08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
English 13
Installation instructions
Electrical connection
For Double Ovens
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Make sure to ground the oven.
Failure to follow these instructions can result in death, fire, or electrical shock.
This oven is manufactured with a neutral (white) power supply wire and a cabinet-
connected ground (green or bare) wire twisted together.
A
A.
UL listed or CSA approved
conduit connector
1.
Disconnect power.
2.
Feed the flexible conduit from the oven
through the opening in the cabinet.
3.
Remove junction box cover if it is
present.
4.
Install a UL listed or CSA approved
conduit connector to the junction box.
5.
Route the flexible conduit from the
oven to the junction box through a
UL listed or CSA approved conduit
connector.
6.
Tighten screws on conduit connector.
7.
See “Electrical Connection Options
Chart” to complete installation for your
type of electrical connection.
For Single Ovens
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death, fire, or electrical shock.
Electrical Connection Options Chart
If your home has:
Go to section:
4-wire
(1.3 cm)
½”
4-Wire Cable from Home Power Supply
3-wire
(1.3 cm)
½”
3-Wire Cable from Home Power Supply
NOTE
If the power connection is plugged in improperly, "
bAd LinE
" appears on the
display.
Reconnect the power connection properly, and the message disappears.
Install_NW9000K_DG68-00862A-09_EN.indd
13
2019-11-11
°° 5:36:08