Samsung NV51T5511DG/AA Installation Guide - Page 15
Install oven, English 15, Cutout
View all Samsung NV51T5511DG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Install oven 1. Using 2 or more people, lift the oven partially into the cabinet cutout. Hang the install handle onto the side hook of the oven as shown below. NOTE Carefully push against front oven frame. Barrier Install Handle A C 2. Push against the seal area of the front frame to push the oven into the cabinet until the back surface of the front frame touches the front wall of the cabinet. B A. Trim Left B. Trim Bottom C. Screw 3. Push oven completely into the cabinet and center the oven into the cabinet cutout. 4. Remove the tape from front trims. • Securely fasten the oven to the cabinet using the screws provided. • Insert the screws through hole in trim aligning with hole in oven frame. Do not overtighten screws. A C B A. Trim Left B. Trim Bottom Large C. Screw Install_NW9000K_DG68-00862A-09_EN.indd 15 WARNING When inserting the oven, use caution not to deform or damage the barrier underneath. 5. The bottom metal trim are shipped in the foam packing. To install the metal bottom trim, see following instructions. • Align tab of the bottom trim with a hole in the left side trim of the unit as shown. Repeat on the right side. • Using one screw on each side of the trim tab, fasten the trim securely to the oven. NOTE The bottom trim piece is to cover any unwanted gaps. 6. If the cutout size is larger than 3/4 inches use of the wider bottom trim is recommended. NOTE To select the bottom trim properly, measure the cutout between cabinet and oven. See the following chart. TYPE Cutout 0 - 3/4" 3/4" - 23/4" English 15 2019-11-11 5:36:09 Installation instructions