Samsung NX58K7850SG/AA User Manual - Page 28

Gas oven Inserting and removing an oven rack To insert an oven rack 1. Place the rear end of the rack on a rack guide. 2. Slide the rack into the rack guide while holding the front end of the rack. To remove an oven rack 1. Pull out the rack until it stops. 2. Pull up the front end of the rack and remove it from the rack guide. Rack and Pan Placement Single Oven Rack 5 3 Multiple Oven Rack Centering the baking pans in the oven as much as possible will produce better results. If baking with more than one pan, place the pans so each has at least 1˝ to 1½˝ of air space around it. If baking on two racks in Single mode, place the oven racks in positions 3 and 5 for the best results. When baking in Single mode on a single oven rack, place the rack in position 3 or 4. • When you use the Gliding Rack, place the Gliding Rack below the flat rack. Using the gliding rack The fully extendable Gliding Rack makes food preparation easier, especially when preparing heavier dishes. The Gliding Rack has 2 glide tracks that allow you to extend the rack well out of the oven without touching the sides of the oven walls. Installing the Gliding rack • With the Gliding Rack in the "Closed" position and the oven off, carefully insert the Gliding Rack between the guides untill the rack reaches the back. • When using the Gliding Rack in the oven, be sure to pull on the handle of the rack only to slide the gliding portion of the rack in and out. If you grasp the frame while using the rack, you will pull the entire Gliding Rack out towards you. NOTE You can install the Gliding Rack in any rack position except the highest (level 7) and lowest (level 1) rack positions in the oven. Removing the Gliding rack • With the Gliding Rack in the "Closed" position and the oven off and cool, grasp the rack and frame and pull both towards you to remove. Gas oven 28 English