Samsung NX58K7850SG/AA User Manual - Page 40

Maintenance To apply the graphite lubricant 1. Shake the graphite lubricant before opening it. 2. Apply 4 drops of lubricant to the inner side of the left sliding track, and 4 drops to the outer side of the left sliding track. 3. Repeat step 2 above on the right sliding track. 4. Extend and collapse the gliding rack several times to distribute the lubricant. NOTE • Do not use a dishwasher to clean the racks. • If a rack does not slide in and out smoothly, apply a few drops of cooking oil to the oven rack guides. • If a rack becomes too difficult to slide in or out, lubricate the rack. • To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864). • For online shopping, visit http://www.samsungparts.com/Default.aspx and search for part DG81-01629A. CAUTION • Do not leave racks in the oven during the self-cleaning cycle. The extreme heat generated in this cycle can permanently peel off the rack coating and make it difficult to remove the rack. • Do not spray cooking oil or lubricant directly onto the gliding rack. Door Do not remove the inner gasket of the oven door for cleaning. Inner side • Inner surface: Clean the inner side of the door manually using a soapy plastic scouring pad, and then wipe with a dry cloth. Take care not to get the gasket wet or allow moisture into the door. • Inner glass: The inner glass is cleaned automatically during the self-cleaning cycle. Outer side • Outer surface: Follow the cleaning instructions for the stainless steel surface in the previous section. • Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse and dry thoroughly. Take care not to get the gasket wet or allow moisture into the door. CAUTION • Do not let moisture enter the door or * contact the door gasket (*). Moisture may reduce the gasket's performance. • Do not let moisture or water enter the burners, electrical controls, or switches. Maintenance 40 English