Samsung PN64D550C1F Quick Guide (easy Manual) (ver.1.0) (English, French, Span - Page 13

Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, or WIS10ABGN - sold separately) to either the USB 1 (HDD) or USB 2 port on the back of your TV. See the illustration below. TV Rear Panel Wireless IP Sharer (AP having DHCP Server) The LAN Port on the Wall or LAN Cable (Not Supplied) Samsung Wireless LAN Adapter Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly. Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key. Your TV is compatible with the following security protocols: yy Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK yy Encryption Type: WEP, TKIP, AES If you select Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. Configuring the Network Connection - Wireless The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user's manual for configuration instructions. To configure your network connection for a network that uses DHCP, follow these steps: 1. Connect your TV to your network as shown in the illustrations above. 2. Turn on your TV, press the MENU button on your remote, and the select Network → Network Settings. Network Settings Select a network connection type. 3. Select Wireless (General), press ENTERE, and then press ENTERE again. 4. The Network function searches for available wireless network. When done, it displays a list of the available networks. Wired Wireless(General) WPS(PBC) One Foot Connection Set up wireless network by selecting your Wireless Router. you may need to enter security key depending on the setting of the Wireless Router. 5. In the list of networks, press the ▲ or ▼ button to select a network, select Next, and then press ENTERE. U Move E Enter e Exit 6 If you have selected a wireless router that has security, the Security Key screen appears. Enter the Security key (Security key or PIN), select Next, and then press ENTERE. ✎✎ When you enter the Security Key (Security or PIN), use buttons on your remote to select numbers and characters. 7 The Network Connection screen appears and verifies the network connection. When the connection has been verified, the "Internet connection successful." message appears. Network set up is complete. ✎✎ For more detailed information, see "Wireless Network Setting" in the e-Manual. English - 13