Samsung R500 User Manual - Page 18
Installing a Wall-mount Kit or Desktop Stand
UPC - 803831623147
View all Samsung R500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing a Wall-mount Kit or Desktop Stand Power the product off and remove the power cable from the power socket. 1 2 3 4 C 5 Notes Using a screw longer than the standard length can damage the internal components of the product. The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the speci cations. Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force. Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one speci ed or from an attempt to install the wall-mount kit on your own. To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10 cm or farther away from the wall. Be sure to use a wall-mount kit that complies with the standards. To install the monitor using a wall mount, disconnect the stand base from the monitor. Unit: mm (inches) Model name VESA screw hole specs (A * B) Standard Screw in millimeters Quantity C27R50* C32R50* 75.0 x 75 .0 (2.95 x 2.95) 4.0 mm , 10.0 mm long 4 EA Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock. A Attach the wall-mount kit or desktop stand here. B Attach the INLAY to the position as shown in the gure. C Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. 18