Samsung RF18HFENBSG User Manual - Page 14
Reassembling the freezer door DRAWER TYPE - RF217,RF197
View all Samsung RF18HFENBSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setting up your French Door Refrigerator Reassembling the freezer door (DRAWER TYPE - RF217,RF197) Slot 1. Pull out the rails to the full length 2. Hang the freezer door front on each sidle of the cabinet onto open slot on the sides. evenly. Slot 3. With the 10mm wrench, reattach 4 bolts to connect the rail with the door. 4. With the drawer pulled out fully, insert the drawer box into the rail system. Reassembling the freezer door (SWING TYPE - RF215, RF195) 1. Place the hole in the bottom of the freezer door over the right side low hinge. 2. Replace the middle hinge connected to the freezer. 3. Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+). Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(3/16"). 4. Replace the cap on the middle hinge. 14_ setting up