Samsung RF18HFENBSG User Manual - Page 18
To use without the water filter
View all Samsung RF18HFENBSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting up your French Door Refrigerator Connect the water line to the fridge • Connect the plastic line on the back of your fridge to the cartridge holder outlet (fully insert the plastic line to the cartridge holder outlet). • Insert plastic clip to the cartridge holder inlet and outlet. • Turn water on and check for any leakage. Cartridge Holder Clip • Y ou can purchase the necessary filter cartridge at the retailer where you purchased this refrigerator. Make sure you buy the SAMSUNG filter cartridge (Replacement cartridge No : DA29-10105J) to ensure the best performance. Filter cartridge Plastic line (Provided) • T he water line must be connected to drinkable water only • A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer. • W hen pushing the Refrigerator back, make sure you don't roll over the power cord or water line(Icemaker supply line) To use without the water filter Connecting to the water supply line • Shut off the main water supply line and turn the Ice maker to the off position. • Locate the nearest cold water drinking line. 1. Cold Water line 2. Pipe Clamp. 3. Plastic line 4. Compression Nut 5. Compression Sleeve 6. Packing Nut. 7. Shut Off Valve Connect the water line to the fridge 1) Slip the compression nut through the plastic tubing. 2) After inserting the compression nut into plastic tubing, tighten the compression nut onto 1/4" compression Household water line Copper tubing or Plastic tubing (Not supplied) (Not supplied) Compression Nut (1/4") (Purchased) fitting(Provided). Do not overtighten the compression nut. • Using Copper Tubing Ferrule (Purchased) Plastic Tubing (Provided) Bulb Compression fitting (Provided) - Slip the compression nut and ferrule on copper tubing as shown. • Using Plastic Tubing Refrigerator Compression Nut (1/4") (Provided) - Insert the molded end(Bulb) of the plastic tubing into the compression fitting. Do not use without the molded end(Bulb) of the plastic tubing. CAUTION 3) Tighten the compression nut onto the compression fitting. 4) Turn water on and check for any leakage. • W ater line must be connected to drinkable water only. • W hen pushing the Refrigerator back, make sure you don't roll over the power cord or water line (Icemaker supply line). 18_ setting up