Samsung RF18HFENBSG User Manual - Page 9
Setting up your French Door Refrigerator
View all Samsung RF18HFENBSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
01 SETTING UP Setting up your French Door Refrigerator GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the Refrigerator • A location with easy access to the water supply. • A location without direct exposure to sunlight. • A location with level (or nearly level) flooring. • A location with enough space for the Refrigerator doors to open easily. • A llow sufficient space to the right, left, back and top for air circulation. • P lease ensure that appliance can be moved freely in the event of maintenance & service. • If you install the Refrigerator where is below 10ºC, it may not function optimally. • Do not locate the refrigerator where the wet condition. First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth of Samsung French Door Refrigerator. Model Width (A) RF197** RF217** RF18** 32 1/8(817) RF20** A B without door (B) 24 1/4(617) 26 1/4(667) 24 1/4(617) 26 1/4(667) C Depth Dimension with door (C) 30 1/2(775) 32 1/2(825) 30 1/2(775) 32 1/2(825) D E (inch/mm) without hinge (D) 68 3/4(1745) 68 3/4(1745) 68 3/4(1745) 68 3/4(1745) Height with hinge (E) 70 1/8(1780) 70 1/8(1780) 70 1/8(1780) 70 1/8(1780) total 70 1/8(1780) 70 1/8(1780) 70 1/8(1780) 70 1/8(1780) (100mm) 337.5mm 135° 817mm 100mm 35mm 90° 135° RF197*/RF18* : 1172mm RF217*/RF20*: 1222mm RF197*/RF18* : 617mm RF217*/RF20*: 667mm 90° RF197*/RF18* : 1172mm RF217*/RF20* : 1222mm 1492mm • The measurements here are based on the design dimension,which may differ depending on the measuring method. When moving your refrigerator CAUTION To prevent floor damage, be sure the front adjusting legs are in the up position(above the floor). Refer to 'Adjusting the doors' (on page 15). FLOORING Flat-blade screwdriver(-) For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 106kg. To protect the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving the refrigerator, be sure to pull it straight out and return it to position by pushing it straight in. Control Lever setting up _9