Samsung RF217ACBP User Manual (user Manual) (ver.0.1) (English) - Page 18

To use without the water filter, Connect the water line to the fridge - best buy

Page 18 highlights

Setting up your French Door Refrigerator Connect the water line to the fridge • C onnect the plastic line on the back of your fridge to the cartridge holder outlet (fully insert the plastic line to the cartridge holder outlet). • Insert plastic clip to the cartridge holder inlet and outlet. • T urn water on and check for any leakage. Cartridge Holder Clip • Y ou can purchase the necessary filter cartridge at the retailer where you purchased this refrigerator. Make sure you buy the SAMSUNG filter cartridge (Replacement cartridge No : DA2900015A) to ensure the best performance. • T he water line must be connected to drinkable water only Filter cartridge Plastic line (Provided) • A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer. • W hen pushing the Refrigerator back, make sure you don't roll over the power cord or water line(Icemaker supply line) To use without the water filter Connecting to the water supply line • S hut off the main water supply line and turn the Ice maker to the off position. • Locate the nearest cold water drinking line. 1. Cold Water line 2. Pipe Clamp. 3. Plastic line 4. Compression Nut 5. Compression Sleeve 6. Packing Nut. 7. Shut Off Valve Connect the water line to the fridge 1) Slip the compression nut through the plastic tubing. 2) After inserting the compression nut into plastic tubing, tighten the compression nut onto 1/4" compression fitting(Provided). Do not overtighten the compression nut. • U sing Copper Tubing - Slip the compression nut and ferrule on copper tubing as shown. • U sing Plastic Tubing - Insert the molded end(Bulb) of the plastic tubing into the compression fitting. Do not use without the molded end(Bulb) of the plastic tubing. CAUTION Household water line Copper tubing or Plastic tubing (Not supplied) (Not supplied) Compression Nut (1/4") (Purchased) Ferrule (Purchased) Plastic Tubing (Provided) Bulb Compression fitting (Provided) Refrigerator Compression Nut (1/4") (Provided) 3) Tighten the compression nut onto the compression fitting. 4) Turn water on and check for any leakage. • W ater line must be connected to drinkable water only. • W hen pushing the Refrigerator back, make sure you don't roll over the power cord or water line (Icemaker supply line). 18_ setting up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

18_
setting up
Connect the water line to the fridge
Connect the plastic line on the back of your fridge to the cartridge
holder outlet (fully insert the plastic line to the cartridge holder
outlet).
Insert plastic clip to the cartridge holder inlet and outlet.
Turn water on and check for any leakage.
You can purchase the necessary filter cartridge at the retailer
where you purchased this refrigerator. Make sure you buy the
SAMSUNG filter cartridge (Replacement cartridge No : DA29-
00015A) to ensure the best performance.
The water line must be connected to drinkable water only
A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.
When pushing the Refrigerator back, make sure you don’t roll over the power cord or water
line(Icemaker supply line)
Setting up your French Door Refrigerator
Cartridge
Holder
Clip
Filter
cartridge
Plastic line
(Provided)
Connecting to the water supply line
Shut off the main water supply line and turn the Ice maker to the
off position.
Locate the nearest cold water drinking line.
To use without the water filter
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut.
7. Shut Off Valve
Connect the water line to the fridge
1) Slip the compression nut through the plastic tubing.
2) After inserting the compression nut into plastic tubing, tighten
the compression nut onto 1/4” compression fitting(Provided).
Do not overtighten the compression nut.
Using Copper Tubing
- Slip the compression nut and ferrule on copper tubing as
shown.
Using Plastic Tubing
- Insert the molded end(Bulb) of the plastic tubing into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing.
3) Tighten the compression nut onto the compression fitting.
4) Turn water on and check for any leakage.
Water line must be connected to drinkable water only.
When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line
(Icemaker supply line).
CAUTION
Household water line
Compression Nut
(1/4”) (Purchased)
Compression
fitting (Provided)
Compression Nut
(1/4”) (Provided)
Bulb
Plastic Tubing
(Provided)
(Not supplied)
(Not supplied)
Copper tubing or Plastic tubing
Refrigerator
Ferrule
(Purchased)