Samsung RF217ACBP User Manual (user Manual) (ver.0.1) (English) - Page 30

CHANGING THE INTERIOR LIGHTS, Refrigerator Light Replacement

Page 30 highlights

Operating your SAMSUNG Refrigerator CHANGING THE INTERIOR LIGHTS Electric Shock Hazard WARNING Before changing any of the interior lights, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to do so could cause electric shock resulting in death, personal injury, or damage to the appliance. Refrigerator Light Replacement 1. Unplug the power cord from the outlet. 2. Open the refrigerator door. 3. Pull the light cover down while pushing it backwards to remove it. 4. Disconnect the housing connector. 5. Change the LED from the light cover 6. Install the light cover, close the door, and plug in the power cord. Light Cover Replacement LED is available from your nearest service center. If you need to change LED, contact our service center Freezer Light Replacment 1. Unplug the power cord from the outlet. 2. Open the freezer door. 3. Pull the shield down while pushing it backwards to remove it. 4. Disconnect the housing connector. 5. Change the LED from the light cover. 6. Install the light cover, close the door, and plug in the power cord. Light Cover 30_ Operating

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

30_
Operating
Operating your SAMSUNG Refrigerator
CHANGING THE INTERIOR LIGHTS
Refrigerator Light Replacement
1. Unplug the power cord from the outlet.
2. Open the refrigerator door.
3. Pull the light cover down while pushing it backwards to remove it.
4. Disconnect the housing connector.
5. Change the LED from the light cover
6. Install the light cover, close the door, and plug in the power cord.
Electric Shock Hazard
Before changing any of the interior lights, either unplug the refrigerator or turn off power at the circuit
breaker or fuse box. Failure to do so could cause electric shock resulting in death, personal injury, or
damage to the appliance.
Freezer Light Replacment
1. Unplug the power cord from the outlet.
2. Open the freezer door.
3. Pull the shield down while pushing it backwards to remove it.
4. Disconnect the housing connector.
5. Change the LED from the light cover.
6. Install the light cover, close the door, and plug in the power cord.
WARNING
Light Cover
Light Cover
Replacement LED is available from your nearest service center. If you need to change LED, contact our
service center