Samsung RF22K9381SG User Manual - Page 33
STEP 6, Initial settings, Final check
View all Samsung RF22K9381SG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installation 4. Flush 1 gallon of water through the filter before drinking or using the water from the refrigerator. (Flush approximately 6 minutes.) To flush, press a large glass or cup against the water dispenser lever. Fill the glass, empty it, and then repeat. 5. After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure all impurities have been removed from the water line. NOTE Only connect the water line to a potable water source. • If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug, leak-free connection. • You can test the water line quickly using a paper cup. Under normal conditions, the water dispenser can fill a 5 3/4 oz. (170 cc) cup in about 10 seconds. STEP 6 Initial settings After you complete the following steps, the refrigerator should be fully functional. 1. Plug the power cord into the wall socket to turn the refrigerator on. 2. Open the door, and check if the interior light lights up. 3. Set the temperature to the coldest setting, and then wait for about an hour. Then, the freezer will be slightly chilled, and the motor should be running smoothly. 4. Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready to use. STEP 7 Final check When installation is complete, confirm that: • The refrigerator is plugged into an electrical outlet and grounded properly. • The refrigerator is installed on a flat, level surface with appropriate clearance between it and any walls or cabinets. • The refrigerator is level and is sitting firmly on the floor. • The door opens and closes freely, and the interior light turns on automatically when you open the door. Untitled-8 33 English 33 2016-03-30 1:29:18