Samsung RF266ABPN User Manual (user Manual) (ver.1.0) (English) - Page 11

Reattaching The Refrigerator Doors

Get Samsung RF266ABPN PDF manuals and user guides View all Samsung RF266ABPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

01 SETTING UP REATTACHING THE REFRIGERATOR DOORS Assemble the Refrigerator doors 1. R eattach two flat head screws( 1 ) and two hex head screws( 2 ) to the hinge completely. 12 10 11 2. P lace the hole in the bottom of the door( 3 )over the lower hinge ( 4 ) Be aware not to miss the hinge cap because it can be easily taken off. 12 3. Insert the upper hinge shaft( 5 ) into the hole on the corner of the Refrigerator door( 6 ). Make sure the hinge is level between the upper hinge hole( 7 ) and the hole of the cabinet( 8 ) and reattach the hinge screws( 9 ) and ground screw( 10 ) by turning in a clockwise direction. Reconnect the wires. 4. P lace the front edge of the top table( 11 ) on the front of the upper hinge( 12 ) and reattach with three screws. When reattaching the top table, make sure that the wires are not pressed or damaged by the top table. 7 8 9 10 5 6 11 12 Setting Up _11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Setting Up
_11
1±
1±
10
11
01 SETTING UP
REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
1. Reattach two flat head screws(
1
) and two hex head
screws(
±
) to the hinge completely.
2. Place the hole in the bottom of the door(
²
)over the lower
hinge (
³
)
Be aware not to miss the hinge cap because it can
be easily taken off.
3. Insert the upper hinge shaft(
´
) into the hole on the
corner of the Refrigerator door(
µ
). Make sure the hinge
is level between the upper hinge hole(
) and the hole of
the cabinet(
·
) and reattach the hinge screws(
¸
) and
ground screw(
10
) by turning in a clockwise direction.
Reconnect the wires.
4. Place the front edge of the top table(
11
) on the front of the
upper hinge(
1±
) and reattach with three screws.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
´
µ
·
¸
10
1±
11