Samsung RF266ABPN User Manual (user Manual) (ver.1.0) (English) - Page 18

Removing any residual matter inside the water, supply line after installing the water filter. - refrigerator ice maker

Get Samsung RF266ABPN PDF manuals and user guides View all Samsung RF266ABPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Setting up your French Door Refrigerator 4. R emove the filter cap and insert the filter into the filter housing. 5. S lowly turn the water filter 90º clockwise to align with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark with center of cover filter printing as illustrated. Remember, do not overtighten. 4 Separation of red cap. Cover filter. 5 Turn until the label aligned. You should remove the right side upper glass shelf before installing water filters. Removing any residual matter inside the water supply line after installing the water filter. 1. T urn ON the main water supply & turn OFF the valve to the water supply line. 2. R un water through the dispenser until the water runs clear (approx. 6-7 minutes). This will clean the water supply system and remove air from the lines. 3. A dditional flushing may be required in some households. 4. O pen the Refrigerator door and make sure there are no water leaks coming from the water filter. /NE4OUCH0URE7ATER Be sure to flush the dispenser thoroughly or water may drip from the dispenser. This is due to the fact that there is still air in the line. Test button CAUTION In case ice doesn't come out, pull out the ice bucket and press test button located on the right side of ice maker. 18_ Setting Up Test button

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
1·_
Setting Up
4. Remove the filter cap and insert the filter into the filter
housing.
5. Slowly turn the water filter 90º clockwise to align with the
printing mark on the cover, locking the filter in position.
Make sure to align the water filter label mark with center of
cover filter printing as illustrated. Remember, do not over-
tighten.
You should remove the right side upper glass shelf before installing water filters.
Removing any residual matter inside the water
supply line after installing the water filter.
1. Turn ON the main water supply & turn OFF the valve to
the water supply line.
2. Run water through the dispenser until the water runs clear
(approx. 6-7 minutes). This will clean the water supply
system and remove air from the lines.
3. Additional flushing may be required in some households.
4. Open the Refrigerator door and make sure there are no
water leaks coming from the water filter.
Be sure to flush the dispenser thoroughly or water may drip from the dispenser.
This is due to the fact that there is still air in the line.
Setting up your French Door Refrigerator
Turn until the label
aligned.
Separation
of red cap.
Cover filter.
³
´
Test button
Test button
In case ice doesn’t come out, pull out the ice bucket and press test button located on the right side of ice
maker.
CAUTION