Samsung RF28N9780SR User Manual - Page 33
To correct the door gap, top cover, Allen wrench, To widen the gap, turn the gap bolt
View all Samsung RF28N9780SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
To correct the door gap Door gaps can be corrected using the gap bolt on the top right corner of the refrigerator. Installation 1. With the door closed, use a Phillips head screwdriver to remove the screws (x3) in the top cover. Then, carefully remove the top cover along with the wire connectors. 2. Use a 4 mm Allen wrench (not provided) to correct the door gap between two doors. - To widen the gap, turn the gap bolt clockwise. - To narrow the gap, turn the gap bolt counterclockwise. 3. When done, reinsert the top cover, and then reinsert the screws that hold it in place. Tighten the screws. CAUTION The electrical connectors must be left intact during this process. Use caution so you don't tangle the connector wires or peel off the coating. Untitled-8 33 English 33 2018-08-27 4:45:02