Samsung RF4287HARS User Manual (user Manual) (ver.0.1) (English) - Page 10

Disassemble the refrigerator doors, the ground screw - door parts

Get Samsung RF4287HARS PDF manuals and user guides
UPC - 036725569713
View all Samsung RF4287HARS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Disassemble the refrigerator doors Be careful not to drop and scratch the doors while warning removing the doors. Disassemble the refrigerator doors 1. With the door opened, remove the cap top table ( 1 ) with a flat-blade screwdriver(-), and close the door. Remove the 3 screws holding down the top table ( 2 ) and turn it with 1 several wires connected. 2. Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) 4 on the left side door. Remove the water line ( 5 ) while pressing the dark gray Red Clip (1/4") color part ( 6 ) of the water line coupler. If a red clip is on the coupler, it must caution be removed before removing the tube. 5 6 2 3 3. Remove the 3 hex head bolts ( 7 ) attached to the upper left and right door hinges with a socket wrench (10mm). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver(+). Remove the upper left and 7 right door hinges ( 9 ). 9 Socket wrench 8 4. Lift the door straight up to remove. 5. Remove the screw ( 10 ) attached to the lower left and right door hinges with a philips screwdriver(+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16"). Remove the lower left and right door hinges ( 12 ). 12 10 11 Allen wrench 10_ setting up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
10_
setting up
Disassemble the refrigerator doors
Be careful not to drop and scratch the doors while
removing the doors.
Disassemble the refrigerator doors
1.
With the door opened, remove the cap top table (
1
) with
a flat-blade screwdriver(-), and close the door. Remove the
3 screws holding down the top table (
2
) and turn it with
several wires connected.
2.
Disconnect one connector (
3
) on the
right side door and one connector (
4
)
on the left side door. Remove the water
line (
5
) while pressing the dark gray
color part (
6
) of the water line coupler.
If a red clip is on the coupler, it must
be removed before removing the tube.
3.
Remove the 3 hex head bolts (
7
) attached to the upper left
and right door hinges with a socket wrench (10mm). Remove
the ground screw (
8
) attached to the upper left and right door
hinges with a philips screwdriver(+). Remove the upper left and
right door hinges (
9
).
4.
Lift the door straight up to remove.
5.
Remove the screw (
10
) attached to the lower left and right
door hinges with a philips screwdriver(+). Remove the 2 hex
head bolts (
11
) attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove the lower left
and right door hinges (
12
).
WARNING
1
2
CAUTION
Socket wrench
7
8
9
Allen wrench
12
10
11
4
5
6
3
Red Clip
(1/4")