Samsung RF4287HARS User Manual (user Manual) (ver.0.1) (English) - Page 16
Assemble the frezer drawer, Insert the upper drawer. - door bin
UPC - 036725569713
View all Samsung RF4287HARS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Assemble the freezer drawer 1. Pull out the rails fully on each side of the cabinet. 2. Attach the freezer door front onto the open slots on the sides. 3. Tighten 4 hex head bolts completely with a socket wrench (10mm). slot SlotSlot 4. Insert the lower basket ( 3 ) into the rail system. 3 5. Hook the ends of the tilting pocket ( 1 ) onto the support guards ( 2 ) and push down until they lock into place. 1 2 6. Insert the upper drawer. Remove 2 pieces of tape ( 4 ) attached to the side of the drawer bin. Reattach the tape in the same position when moving the 4 refrigerator to prevent scratching the drawer bin. 16_ setting up
16_
setting up
ASSEMBLE THE FREEZER DRAWER
1.
Pull out the rails fully on each side of the cabinet.
2.
Attach the freezer door front onto the open slots on the sides.
3.
Tighten 4 hex head bolts completely with a socket wrench
(10mm).
4.
Insert the lower basket (
3
) into the rail system.
5.
Hook the ends of the tilting pocket (
1
) onto the support guards (
2
)
and push down until they lock into place.
6.
Insert the upper drawer.
Remove 2 pieces of tape (
4
) attached to the side of the drawer
bin.
Reattach the tape in the same position when moving the
refrigerator to prevent scratching the drawer bin.
3
1
2
4
slot