Samsung RH25H5611SG User Manual - Page 14

Leveling The Refrigerator

Get Samsung RH25H5611SG PDF manuals and user guides View all Samsung RH25H5611SG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

CAUTION Do not remove the sensor assembly in the right upper hinge cover. Re-attaching the Fridge Door To re-attach the fridge door, replace parts in reverse order. Re-attaching the Water Supply Lines 1. The Water Lines must be fully Inserted into the center of the transparent coupler to prevent water leakage from the dispenser. 2. Insert the 2 clips in the install pack as shown below, and then confirm that each clip holds the line firmly. Center of Transparent coupler Re-attaching the Freezer Door To re-attach the freezer door, replace parts in reverse order. CAUTION Hook the wire on the Hinge Hook to prevent damage to the wire when re-assembling. Clip A (1/4") (6.35 mm) CAUTION Make sure the color of the water lines match. LEVELING THE REFRIGERATOR The refrigerator must be level before you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. The front of the refrigerator is also adjustable. Before levelling the refrigerator, remove the front leg cover. Open both the freezer and refrigerator doors. Unscrew the three screws holding the front leg cover in place by turning them counter-clockwise. When the screws are loose, remove the front leg cover. DA68-02981J-00.indb 14 English - 14 14. 11. 25. �� 10:26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
English - 14
CAUTION
Do not remove the sensor assembly in the right
upper hinge cover.
Re-attaching the Fridge Door
To re-attach the fridge door, replace parts in
reverse order.
Re-attaching the Freezer Door
To re-attach the freezer door, replace parts in
reverse order.
CAUTION
Hook the wire on the Hinge Hook to prevent
damage to the wire when re-assembling.
Re-attaching the Water Supply Lines
1. The Water Lines must be fully Inserted into the
center of the transparent coupler to prevent
water leakage from the dispenser.
2. Insert the 2 clips in the install pack as shown
below, and then confirm that each clip holds
the line firmly.
Center of Transparent coupler
Clip A (1/4”)
(6.35 mm)
CAUTION
Make sure the color of the water lines match.
LEVELING THE REFRIGERATOR
The refrigerator must be level before you can make
final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
The front of the refrigerator is also
adjustable.
Before levelling the refrigerator, remove
the front leg cover.
Open both the freezer and refrigerator doors.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
DA68-02981J-00.indb
14
14. 11. 25.
�� 10:26