Samsung SCS-2U3100/VER User Manual Ver.f8 (English) - Page 17
mini-coax cable to the port on the Network Extender, Connect and secure the terminal end of the same
View all Samsung SCS-2U3100/VER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
GPS antenna cover 3. Firmly press down on the Open groove (top of station). 4. Slide the protective cover back to expose the rectangular GPS antenna. 5. Use a blunt tool (such as a coin) to carefully pry the GPS antenna away from the Network Extender, in the same direction as shown in step 4. 6. Remove the GPS antenna from its compartment. 7. Connect and secure the GPS antenna to the end of the provided GPS cable labeled "Connect to GPS Antenna." 8. Connect and secure the terminal end of the same mini-coax cable to the port on the Network Extender (within the GPS antenna compartment). Warning!: Do not force the connector into the GPS antenna port as this can damage the connector. 9. Replace the cover on the station. Verify the cable is threaded through the opening on the cover. 10. Rotate the antenna back up to its original position. Tip: Place the antenna near a window where the GPS signal is strongest. Warning!: Do not use duct tape to secure the GPS antenna to its new location. Tip: You can use double-sided tape to secure the bottom of the GPS antenna to its new location. External GPS Antenna 14