Samsung SP-M220W Owners Manual - Page 29
Connecting an AV device with Component output
View all Samsung SP-M220W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2-15 Connecting an AV device with Component output Make sure that the AV device and your projector are turned off. 1. Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes". 2. Connect the [AUDIO IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device using an audio cable (Not supplied). Installation and Connection 2-15
Installation and Connection
2-15
2-15
Connecting an AV device with Component output
Make sure that the AV device and your projector are turned off.
1.
Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to
Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".
2.
Connect the [
AUDIO IN (L-AUDIO-R)
] terminal on the back of the projector and the Audio out terminal on your AV device using
an audio cable (Not supplied).