Samsung SP-M220W Owners Manual - Page 36
LED Indications, STATUS, STAND
View all Samsung SP-M220W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3-4 LED Indications LED Indications :Light is On :Light is Blinking :Light is Off STATUS LAMP STAND BY STATUS If you press the [POWER] button on the remote control or projector, the screen appears within 30 seconds. The projector is operating normally. The projector is preparing an operation after the [POWER] button on the projector or the remote control has been pressed. The [POWER] button has been pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Operates for about 3 seconds.) The cooling fan inside the projector is not operating normally. Refer to Action 1 in Clearing Indicator Problems below. The lamp cover protecting the lamp unit is not closed properly. Refer to Action 2 in Clearing Indicator Problems below. The projector has changed to Cooling mode because its internal temperature has increased beyond the maintenance limit. Refer to Action 4 in Clearing Indicator Problems below. The projector has turned itself off automatically because its internal temperature has increased beyond the maintenance limit. Refer to Action 5 in Clearing Indicator Problems below. A problem has occurred with the operation of the lamp. Refer to Action 6 below. 3-4 Using