Samsung SRP-350PG Service Manual - Page 68
ESC 2, ESC 3 n, ESC = n, ESC ? n
View all Samsung SRP-350PG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Command ESC 2 [Name] [Format] [Description] Select default line spacing. ASCII ESC 2 Hex 1B 32 Decimal 27 50 Selects 1/6-inch line (approximately 4.32mm) spacing. ESC 3 n [Name] [Format] [Range] [Description] Set line spacing ASCII ESC 3 n Hex 1B 33 n Decimal 27 51 n 0 ≤n ≤255 Sets the line spacing to [n X vertical or horizontal motion unit] inches. ESC = n [Name] [Format] [Range] [Description] Select peripheral device. ASCII ESC = n Hex 1B 3D n Decimal 27 61 n 0 ≤n ≤3 Selects device to which host computer sends data, using n as follows : Bit Off/On Hex Decimal 0 Off 00 0 On 01 1 1-7 - - - Function Printer Disabled. Printer Disabled. Undefined. ESC ? n [Name] [Format] [Range] [Description] Cancel user-defined characters. ASCII ESC ? n Hex 1B 3F n Decimal 27 63 n 32 ≤n ≤126 Cancels user-defined characters. ESC @ [Name] [Format] [Range] [Description] Initialize printer. ASCII ESC @ Hex 1B 40 Decimal 27 64 32 ≤n ≤126 Clears the data in the print buffer and resets the printer mode to the mode that was in effect when the power was turned on. ESC D n1... nk NUL [Name] Set horizontal tab positions. [Format] ASCII ESC D n1... nk NUL Hex 1B 44 n1... nk 00 Decimal 27 68 n1... nk 0 [Range] 1 ≤n ≤255 0 ≤k ≤32 [Description] Sets horizontal tab positions. * n specifies the column number for setting a horizontal tab position from the beginning of the line. * k indicates the total number of horizontal tab positions to be set. Samsung Electro-Mechanics 8-5