Samsung SV5000W Owners Instructions - Page 48

Audio Dubbing a Pre-recorded Cassette GB With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from: x a CD player ; x a microphone connected to a sound system ; or x a cassette player. Note: Audio dubbing is applicable only to the linear audio track . STROBE AUDIO 23 ART INPUT 56 89 CH 4 CLR/RST 0 0 REW 5 REC PLAY STOP F.F 6 P/STILL DISPLAY MONITOR A.DUB INPUT OUTPUT REC DISPLAY NPUT STOP P/STILL MONITOR A.DUB 7 OUTPUT 1 Connect an RCA audio cable to the appropriate output on your sound system (CD/cassette player for example). 2 Connect the other end of the RCA audio cable to the audio input connectors (L+R) on the front of your VCR. 3 Insert the pre-recorded video cassette on which the audio track is to be replaced. 4 Select the LINE 1 input by pressing INPUT until L I is displayed. 5 Locate the point on the cassette at which you wish to start dubbing. 6 Press P/STILL ( ). 7 Press A.DUB. Result: Your VCR is now in the Audio Dubbing Pause mode. 8 On the sound system, locate the point on the CD or cassette at which you wish to start playback. Example: The track that you wish to record on the cassette. 9 Press the pause button on your sound system. 10 When you are ready: x start playback on the sound system ; and x press REC or P/STILL ( ) on the remote control. Result: The soundtrack is replaced on the pre-recorded video cassette. 11 When you have finished recording, press STOP ( ). REC STOP 11 P/STILL DISPLAY 10 MONITOR 10 A.DUB INPUT OUTPUT 44