Samsung TX-S3064WR User Manual (user Manual) (ver.1.0) (English) - Page 13

Connecting an Amplifier/DVD Home Theater Amplifier/DVD Home Theater TV Rear Panel 1 2 Audio Cable (Not supplied) ➢ Each external input source device has a different back panel configuration. ➢ When connecting an external device, match the color of the connection terminal to the cable. 1. Connect Audio Cables between the AV OUT [L-AUDIO-R] on the TV and AUDIO IN on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the "AUDIO OUT [L-AUDIOR]" terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier's volume control. Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Plug & Play Feature When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. Plug & Play Start Plug & Play. OK 1. Press the POWER button on the remote control. The message "Plug & Play" is displayed. It flickers for a little while and then Language menu is automatically displayed. Enter Return TV Setup Plug & Play Language Time V-Chip Caption : English Español Português Français † More Move Enter Skip 2. Press the ... or † button to select the language, then press the ENTER button. The message "Check antenna input." is displayed. ➢ If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later. Plug & Play Check antenna input. OK Enter Skip 3. Make sure that the antenna is connected to the TV. Press the ENTER button. The "Search" menu is displayed. Continued... English-13