Samsung TX-S3082WH User Manual (user Manual) (ver.1.0) (English) - Page 13

Connecting an Amplifier/DVD Home Theater Amplifier/DVD Home Theater TV Rear Panel Audio Cable (Not supplied) ➢ Each external input source device has a different back panel configuration. ➢ When connecting an external device, match the color of the connection terminal to the cable. 1. Connect Audio Cables between the AV OUT [L- AUDIO-R] on the TV and AUDIO IN on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the "AUDIO OUT [L-AUDIOR]" terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier's volume control. Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Plug & Play Feature When the TV is initially powered on, basic customer settings proceed automatically and subsequently: Menu language, Channels and Time will be set . Start 1. Press the POWER button on the remote control. The message "Menu language, Channels and Time will be set." is displayed. Press the ENTER button, then "Select the language of the OSD." menu is automatically displayed. Plug & Play Select the language of the OSD. Language English Español Français Move Enter Skip 2. Press the ENTER button to enter the language. Press the ... or † button to select language, then press the ENTER button. "Select the antennas to memorize." menu is automatically displayed. Plug & Play Select the antennas to memorize. Air Start Cable Start Air + Cable Start Move Enter Skip 3. Press the ... or † button to memorize the channels of the selected connection. Press the ENTER button to select "Start". ➢ If the antenna is connected to ANT 1(AIR), select "Air" and if it is connected to ANT 2 (CABLE), select "Cable". ➢ If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable". ➢ In Cable mode, you can select the correct signal source among "STD", "HRC", and "IRC" by pressing the œ button, then press the ... or † button. Press the √ button to select "Start", then press the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area. English-13 Continued...