Samsung TX-S3082WH User Manual (user Manual) (ver.1.0) (English) - Page 17
Memorizing the Channels, Storing Channels in Memor, y Automatic Method
View all Samsung TX-S3082WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an air or a cable system). Channel Antenna : Air Auto Program Channel Manager Name Fine Tune Signal Strength 1. Press the MENU button to display the menu. √ Press the ... or † button to select "Channel", then press the ENTER button. √ √ √ √ √ Move Enter Return Channel Antenna : AAirir Auto Program Cable Channel Manager Name Fine Tune Signal Strength 2. Press the ENTER button select "Antenna". Press the ... or † button to select "Air" or "Cable", then press the ENTER button. Press the EXIT button to exit. Move Enter Return Storing Channels in Memory (Automatic Method) Channel Antenna : Air Auto Program Channel Manager Name Fine Tune Signal Strength 1. Press the MENU button to display the menu. √ Press the ... or † button to select "Channel", then press the ENTER button. √ √ 2. Press the ... or † button to select "Auto Program", then press the ENTER √ button. √ √ Move Enter Return Auto Program Select the antennas to memorize. Air Start Cable Start Air + Cable Start Move Enter Return Auto Program Select the cable system. Analog STD ✔ Start HRC IRC 3. Press the ... or † button to select the antenna connection, then press the ENTER button. ➢ Air: "Air" antenna signal. Cable: "Cable" antenna signal. Air+Cable: "Air" and "Cable" antenna signals. ➢ If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is connected to ANT 2 IN (CABLE), select "Cable". ➢ If both ANT 1 IN and ANT 2 IN are connected, select the "Air + Cable". ➢ If you selected "Air", then go to step 5. 4. Select the correct signal source (STD, HRC, and IRC) by pressing the œ button, then press the ... or † button. Press the √ button to select "Start", then press the ENTER button. ➢ STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Move Enter Auto Program Auto Program in progress. Stop Enter Return Air 16 15% Return 5. After all the available channels are stored, the "Auto Program" menu reappears. Press the EXIT button to exit. You can also press the AUTO PROG. button on the remote control to bring up the Auto Program menu. English-17