Samsung TXL3676 User Manual (user Manual) (ver.1.0) (English) - Page 17
Viewing a VCR or Camcorder Tape
View all Samsung TXL3676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. If you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different. 2.5 CHAPTER TWO: INSTALLATION