Samsung WA48J7700AW/A2 User Manual - Page 35

Washing a load of laundry Garment Plus You can add or take out laundry items even after the wash has started, as long as the Garment Plus indicator is on. Pressing Start/Pause unlocks the lid. If you open the lid and want to continue the wash cycle, close the lid, and then press Start/Pause. NOTE If you have activated the Child Lock, you must deactivate it first. See page 33. Delay End You can set the washer to start your wash automatically at a later time, by choosing a delay time. The hour displayed indicates the time at which the wash will be ended. 1. Set your wash cycle. 2. Press Delay End repeatedly until the delay time is set. 3. Press Start/Pause. The "Delay End" indicator will be lit, and the clock will begin counting down until it reaches the set time. 4. To cancel a Delay End function, press the Power button and then turn the washer on again. Pre Soak Use this function when the laundry is heavily contaminated or stained. This function improves the wash performance by adding a Pre Soak cycle. • If you select this function, the total cycle time is increased by 15 minutes. • When the Pre Soak cycle starts, the washer repeats a wash cycle after supplying water and then performs a 15-minute soak cycle. • When the Pre Soak cycle is complete, the configured wash cycle starts without draining water. AquaJet™ With a strong spray and soapy water recirculated by the AquaJet™ pump, laundry can be more gently and thoroughly cleaned than in conventional Top Loads. • AquaJet™ Deep Clean: If AquaJet™ Deep Clean is selected, washing performance can be further improved by the additional spray action. Sufficient water quantity can be ensured by adjusting the water level. Cycles NORMAL, HEAVY DUTY, SUPER SPEED (WA48J7770A*), COLORS/DARKS (WA48J7700A*), PERM PRESS, ACTIVE WEAR, RINSE+SPIN BEDDING, DELICATES, WATERPROOF, QUICK WASH, SPIN AquaJet™ Deep Clean Available Not available English 35 8 JOEE